Why is a flood cut a part of the restoration process during a water leak?
Why is a Flood Cut a Vital Part of the Restoration Process?
Unfortunately, flooding is sometimes unavoidable in Far North Dallas, TX. The important thing is to be prepared to rebuild and repair. One very common tactic used when cleaning and repairing water damage after a flood is called a flood cut. It involves cutting out a large portion of the walls and replacing it with new material. You may be wondering why a flood cut is necessary, as it does tear out a large portion of a building. Take the time to learn all about the flood cut and why it is a vital part of the restoration process.
The Different Categories of Water
To understand flood cuts, you must first understand the different categories of water damage.
Category one water is completely clean. This type of water usually comes from broken pipes.
Category two water, which is sometimes called grey water, is contaminated with minor microbes and bacteria. This type of water usually comes from broken appliances, such as washing machines or showers.
Category three water, which is sometimes called black water, contains serious contamination. This water comes from flooding, septic failure, and other major events.
A flood cut is usually only employed when category two or three water is involved. Most of the time, the water in a flood falls into the third category, which makes it incredibly dangerous.
What Is a Flood Cut?
A flood cut is essentially a line drawn on the walls 12 inches above the highest point the water ever reached. Everything below this line must be gutted from the wall to protect against contamination and mold growth. Category three water can cause serious health problems, which is why a flood cut is so important after flooding. It may be more expensive, but not having a flood cut done is putting yourself at risk to save a few bucks. You should always choose a restoration company that values the flood cut technique.